TD-SC1 應力型荷重訊號模組
.png)
· High-speed sampling (20,000 times/sec. (Resolution: 24bit))
· EterNet/IP, CC-Link, RS-485 (Communication options)
*The release date of CC-Link and EtherNet/IP is yet to be determined.
· Various settings by PC, and Display
· Plug-and-Play TEDS Calibration
The TD-9000T is a digital indicator for load management that supports two inputs, load (load cell) and stroke (displacement gauge).
High-speed A/D conversion of 25,000 times/sec and equipped with a 4.3-inch touchscreen monitor in DIN1/4 (92 x 92) size. While being high-end, it is a high-performance model that realizes a low price.
Waveforms during measurement can be checked in real time. Widely usable from daily monitoring to verification of processing data.
| Bridge Voltage | DC 10 V, 5 V±10% (30mA current maximum, can be used with remote sense) | |
|---|---|---|
| Signal input range | ±5.0mV/V | |
| Equivalent Input/TEDS | Calibration range | 0.05mV/V - 5.0mV/V |
| Calibration precision | Within 0.1% F.S. (when using 1m standard TEAC Ø8, 6-core shielded cable with 350Ω impedance, 10V BV and 5mV/V setting) | |
| Precision | Linearity | Within 0.01%F.S. +1 digit (when input is 5mV/V) |
| Zero drift | Within 0.5µV/ºC (Input conversion value) | |
| Gain drift | Within ±0.005%F.S/ºC | |
| A/D conversion | 24-bit, 20000 times/second | |
| Digital filter | Select 3, 10, 30, 100, 300, 1000 Hz(−6 dB/oct) or none | |
| D/A output** | 4000 times per second, isolated output, ±1–±10V voltage output (set in 1V steps) and about 1/59000 resolution (when set to ±10 V), or 4–20mA current output and about 1/43000 resolution | |
| TEDS function | IEEE1451.4 class 2 mix mode interface | |
| Indicator value | Display range | −99999 to 99999 |
| Decimal point | Display position selectable | |
| Times displayed | Select 4, 6, 10 or 20 times/second | |
| Setting items | Calibration settings | Zero Balancing, TEDS Calibration, Actual Load Calibration, Equivalent Input Calibration |
| Function settings | High limit, low limit, comparison mode, hysteresis, nearly zero, moving average, low pass filter, motion detect, zero tracking, static strain, digital zero, digital offset, zone definition, hold mode, lock, minimum grid, display times, bridge voltage, digital zero limit, clear digital zero, comparison output pattern, select data output**, D/A converter**, remote sense | |
| Hold function | Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom) | |
| External input and output signals | Input | Hold, clear, digital zero (isolated from main unit circuits using a photocoupler) |
| Output | HI, OK, LO open collector output (isolated from main unit circuits using a photocoupler) | |
| RS-485* | A+, B–(isolated from main unit circuits using a photocoupler), TRM, SG | |
| Power supply | Ratings: 24V DC ±10% 7W | |
| Operating temperature range | 0℃ to 40℃ | |
| Storage temperature range | –20℃ to 60℃ | |
| Operating humidity range | 85% RH or less (without condensation) | |
| Applicable standards | CE marking, FCC (Class A), UL61010-1, UKCA | |
| External dimensions (W×H×D) | Approximately 30 mm × 85 mm × 110 mm (without protrusions) | |
| Weight | About 210 g | |
相關產品
