首頁
>
廠牌分類
>
TEAC
>
指示計
>
TD-01掌上型荷重元指示計
廠牌分類
Brand
廠牌分類
Brand
TD-01掌上型荷重元指示計
chevron_right
TD-01 掌上型數位指示計
1. 24bit 1KHz 的A/D取樣速度
2. 彩色LCD螢幕可以顯示量測數據或量測之波形圖
3. 具備先進TEDS功能(自動校正)
4. 本體具備記憶體可以儲存量測數據
5. 具備靜態應力數值顯示以供使用者比對
6. 具備荷重元(如某段應力橋臂)斷線診斷能力
7. 具備標準NDIS母座接頭與一般夾式裸線接線輸入皆可對應
8. 具備英文或日文介面可供使用者切換
9. 可以電池運作或使用充電寶(USB電源)來運作
10. 具備D/A輸出功能, 產線最適合使用
11. 本體含USB介面, 並提供免費版TD-10內部收錄數據由USB連接傳送至電腦(CSV format files) 讓使用者進一步處理)
High-performance color graphic LCD screen
-
2.4" color TFT LCD provides great visibility and a variety of information display.
-
It can be displayed in the color behavior judgment.
Waveform & bar meter display function
-
Graphical chart allows users to check input signals instinctively.
TEDS function (Automatic calibration)
-
TEDS function reads the calibration information to automatically, and records calibration values when the power is turned on.
-
Sensor information can be displayed and rewritten.
Indicator value list
-
This function can display a list of recorded indicator values.
-
Waveform screen can be recorded, displayed and compared.
Static Strain Disp. Mode
-
Show the input signal with the strain amount unit.
-
This function makes it easier to check load-cells for plastic deformation.
Interrupt Check
-
Disconnecting becomes readily apparent at a field.
-
If the possibility of an interruption is detected, the location of the possible interruption will be shown in red.
Dual Input
-
Round connector (NDIS7P)
-
Connecting with the terminal bank
Dual language Support (English and Japanese)
-
Japanese / English changeable.
Multiple power supply system
-
Continuous operation time on four AA batteries power is approximately 24 hours (when the EVOLTA alkaline batteries are used).
-
USB bus power can enable the unit to drive for many hours continuously.
| Compatible sensors | Strain gauge transducer | |
|---|---|---|
| Signal input terminals | Round connector(NDIS7P)/terminal bank(connect only one at a time) | |
| Bridge Voltage | DC, 2.5 V ±5% (30mA maximum current) | |
| Signal input range | ±5 mV/V | |
| D/A output | ± 2V | |
| Equivalent input/TEDS | Calibration range | 0.3 mV/V – 5.0 mV/V |
| Calibration precision |
Within 0.1% F.S. (when using a 1m standard TEAC Φ8, 6-core shielded cable with 350Ω impedance, when 5mV/V) |
|
| Precision | Linearity | Within 0.01% F.S. + 1 digit (when 5mV/V) |
| Zero drift | Within 0.5 μV/°C (input conversion value) | |
| Gain drift | 0.005%/ºC or less | |
| A/D conversion | 1000 times/second, 24-bit | |
| Digital filter | Moving average (select from OFF, 16, 32, 64, 128, 256, 512, 1024, 2048) |
|
| D/A output | Output connector | BNC |
| Output voltage | ±2.0 V | |
| Resolution | 70.16μV typ | |
| Linearity | 0.02% F.S. or less | |
| Zero drift | 0.1 mV/ºC or less | |
| Gain drift | 0.003%/ºC or less | |
| TEDS function | IEEE1451.4 class 2 mix mode interface | |
| Display | Display | 2.4" color TFT LCD |
| Display modes | Setting screens, indicator value digital display, graph display, recorded data list display, static strain display |
|
| Languages | Japanese/English | |
| Indicator value | Display range | －99999 to 99999 |
| Decimal point | Display position selectable | |
| Displayed items | Calibration settings |
Zero calibration/span calibration (TEDS calibration, actual load calibration, equivalent input calibration) |
| Function settings | High limit, low limit, comparison mode, hysteresis, nearly zero, moving average, motion detect, zero tracking, digital zero, digital zero offset, zone definition, hold mode, control lock, minimum grid, digital zero limit, clear digital zero, select data output, D/A converter | |
| Sensor value memory | Six types of calibration values for each connected sensor | |
| Hold functions | Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom) | |
| Data recording | Indicator value | 300 maximum Recorded contents: ID number, date and time, recording mode, sensor value memory number, indicator value |
| Graph recording | 8 maximum Recorded contents: ID number, date and time, sensor value memory number, trigger mode, graph waveform |
|
| Power supply | 4 alkaline or NiMH AA batteries USB bus power (built-in Micro-USB B connector) | |
| Operating temperature range | 0℃ to 40℃ | |
| Storage temperature range | －20℃ to 60℃ | |
| Operating humidity range | 85% RH or less (without condensation) | |
| Applicable standards | CE marking, VCCI (Class A), FCC (Class A), UKCA | |
| External dimensions (W×H×D) | Approximately 85mm × 140mm × 35mm (without protrusions) | |
| Weight | About 320 g (including batteries) | |
TEAC TD-01 攜帶型指示計
